xk0-002 Exam

- Covers the entire recommended syllabus
- Comprehensive questions and answers about xk0-002 exam
- Verified Answers Researched by Industry Experts and almost 100% correct
- xk0-002 exam questions updated on regular basis
- Same type as the certification exams, xk0-002 exam preparation is in multiple-choice questions (MCQs)
- Tested by multiple times before publishing
- Try free xk0-002 exam demo before you decide to buy it in Hiexam
- Technical support through Live Chat or Email

　
　
Exam : CompTIA XK0-002
Title : Linux+ Certification Exam(2004 Objectives)


1. At boot time, the computer reported that there are problems with inodes and blocks. Which of the following is the problem and how is it corrected?
A. The boot sector is corrupt and needs to be replaced.
B. The file system has become corrupt and needs to be repaired.
C. The partition table has become corrupt and needs to be repaired.
D. The drive is configured using an improper file system and needs to be reformatted.
Answer: B

2. A DHCP server has been added to the network. The local system has been reconfigured to connect using DHCP. How could an administrator restart network services and test that the interface and the DHCP server are functioning properly?
A. /sbin/route restart; ifconfig lo
B. /bin/netstat -R; ping comptia.org
C. /usr/bin/network restart; ping comptia.org
D. /etc/init.d/network restart; ifconfig eth0
Answer: D

3. An administrator who logged in as a standard user needs to kill process 1010 that was started by the root user. Which of the following commands will kill the process?
A. kill 1010
B. su "kill 1010"
C. killall -9 1010
D. su -c "kill 1010"
Answer: D

4. A technician added a PCI network card to a stable Linux server. The server is now generating I/O errors when the kernel module for the network card is loaded. Which of the following actions will solve the problem?
A. Disable the power management in the BIOS.
B. Move the network card to another available slot.
C. Reconfigure the network card to use a different IP address.
D. Change the server BIOS setting to disable the network card BIOS.
Answer: B

5. Which of the following commands will mount a USB flash drive successfully in Linux?
A. mount /dev/sda1 /mnt/usb
B. mount -t usbfs /dev/usb001 /mnt/usb
C. mount /dev/uda1 /mnt/usb
D. mount /dev/hde1 /mnt/usb
Answer: A

http://www.Hiexam.com The safer.easier way to get Linux Certification.