SK0-002 Exam

- Covers the entire recommended syllabus
- Comprehensive questions and answers about SK0-002 exam
- Verified Answers Researched by Industry Experts and almost 100% correct
- SK0-002 exam questions updated on regular basis
- Same type as the certification exams, SK0-002 exam preparation is in multiple-choice questions (MCQs)
- Tested by multiple times before publishing
- Try free SK0-002 exam demo before you decide to buy it in Hiexam
- Technical support through Live Chat or Email

　
　
Exam : CompTIA SK0-002
Title : Network+ Certification Exam


1. Which of the following is the functional description of a server connected between two separate IP subnets?
A. server as a bridge
B. server as a router
C. server as a switch
D. server as a data link
Answer: B

2. Click the Exhibit button.
From a local machine, connectivity with a server named server1.comptia.org is checked. It cannot be reached, but it can be accessed via the IP address.
Which of the following is the MOST common cause of this error?
A. The server is down.
B. The DNS server is down.
C. The local DNS cache is full.
D. The local DNS client is stopped.
E. The local DNS cache is corrupted.
Answer: B

3. The latest SCSI adaptor card is purchased from a vendor. Drivers for the operating system cannot be obtained. The SCSI adapter card is added to an existing server. Upon booting, the operating system does not detect the card. Which of the following is the MOST likely cause of the problem?
A. The SCSI card is not seated correctly.
B. The termination is incorrectly set on the SCSI card.
C. The SCSI card is not listed on the operating system HCL (Hardware Compatibility List).
D. Operating system patches were not updated before installing the card.
Answer: C

4. A company plans to upgrade a network server. Before proceeding with the upgrade, the HCL (Hardware Compatibility List) and hardware is checked and necessary backups and documentation are made.
The existing 512 MB of SDRAM is replaced with 1024 MB. The 10 Mbps network card is replaced with a 10/100 PCI network card. When the server restarts, beeps sound and the server does not pass the POST.
Which of the following is the MOST likely cause of the problem?
A. The memory is not seated correctly.
B. The network card is not configured correctly.
C. The server does not support 1024 MB of memory.
D. Master SDRAM ECC needs to be enabled in the CMOS.
Answer: A

5. Which three should be documented after upgrading a SCSI RAID controller? (Select THREE)
A. disk utilization
B. installation date
C. adapter baselines
D. location slot of the RAID controller
E. status of the adapter card installation
F. RAID controller information (warranty, specifications etc.)
Answer: BDF

http://www.Hiexam.com The safer.easier way to get Server Certification.