HP0-Y19 Exam

- Covers the entire recommended syllabus
- Comprehensive questions and answers about HP0-Y19 exam
- Verified Answers Researched by Industry Experts and almost 100% correct
- HP0-Y19 exam questions updated on regular basis
- Same type as the certification exams, HP0-Y19 exam preparation is in multiple-choice questions (MCQs)
- Tested by multiple times before publishing
- Try free HP0-Y19 exam demo before you decide to buy it in Hiexam
- Technical support through Live Chat or Email

　
　
Exam : HP HP0-Y19
Title : ProCurve Accelerated ASE Mobility


1. What is the effect of the following command entered at the CLI of a ProCurve Switch 5406zl?
5406zl(vlan-100)#interface a1
A. The CLI displays the status of port A1.
B. Port A1 becomes a tagged member of VLAN 100.
C. The CLI enters the configuration context for port A1.
D. Port A1 is enabled.
Answer: C

2. You connect an IP telephone that supports LLDP-MED to a port on a ProCurve Switch 5406zl. The port is a member of a voice VLAN and also requires 801X authentication. How will LLDP-MED and 801X interact?
A. The switch will exempt the phone from the 802.1X requirement after confirming its LLDP-MED information.
B. The switch will submit the phone's authentication credentials to a RADIUS server after the devices exchange LLDP-MED information.
C. The switch will permit LLDP-MED communication with the phone after authentication is complete.
D. The switch will use information from the phone's first LLDP-MED frame to submit its authentication credentials.
Answer: C

3. You must determine if a customer's RADIUS server will support authentication of switch management users for ProCurve switches. Which authentication method is required?
A. PEAP
B. PAP/SPAP
C. MS-CHAP/MS-CHAPv2
D. CHAP
Answer: B

4. The front-panel security settings on a ProCurve switch are at default. How can you gain access to the CLI of the switch if the manager and operator passwords have been lost?
A. by pressing the Reset button on the switch's front panel and holding it down until the switch restarts
B. by pressing the Clear button on the switch's front panel and holding it down for three seconds or more
C. by power cycling the switch and accessing the ROM console to clear passwords at the manager prompt
D. by resetting the passwords using the Secure Access Wizard in ProCurve Manager Plus
Answer: B

5. Which command, entered at the CLI of a ProCurve switch, saves the switch's running configuration to its startup configuration?
A. write config
B. save running-config
C. save startup-config
D. write memory
E. copy running-config startup-config
Answer: D

http://www.Hiexam.com The safer.easier way to get Certification I Certification.